SA07

Standards that measure treadwear, temperature resistance and traction, example: "640 A A". The 640 is the treadwear test and it lasted 6.4 times longer than the comparison tire tested against. The first "A" is the traction rating using straight-line wet traction on test surfaces (see information tables tab) and the second "A" is the temperature rating by testing operation at high speeds without heat-related failure (see information tables tab)

Low rolling resistance tires are designed to reduce the energy loss as a tire rolls, decreasing the required rolling effort, improving vehicle fuel efficiency

The side of the tire between the tread and rim, with cosmetic branding as well as information about the tire including manufacturer, model, size, etc.

An identifier of a particular tire line and size combination assigned by the tire manufacturer.

The highest inflation pressure (measured in pounds of force per square inch, PSI) the tire is designed to contain, and should only be used when called for by the vehicle placard

The range of widths the rim of the vehicle can be for this tire to be safely mounted on

The measurement of width from a tires inner sidewall to the outer sidewall

The diameter of a tire that is inflated without any load applied